Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Orlando, FL | Cardinal Air Duct Orlando
Our Air Duct Cleaning in Orlando for Trane systems costs between $350 and $650 for a standard single-family home, and we’re the independent crew that actually knows how Trane equipment interacts with Central Florida’s humid, pollen-heavy air. We’re not a manufacturer shop, and we don’t pretend to be. But Omar Haddad and our team have spent years pulling apart Trane air handlers, condensers, and the flex-duct networks feeding them across Orlando, and that brand-specific knowledge changes how we clean. Call us at (850) 750-6095 for a written quote before anything gets touched.
Why Orlando Residents Choose Us for Trane Service
Here’s what we hear from homeowners after they’ve had one of the big franchise companies out: the tech arrived with a shop vac, charged by the vent, and never once looked at how the ducts were actually connected to the Trane air handler. Omar grew up in Los Angeles, learned the trade at Los Angeles Trade-Technical College, and moved east years ago with a specific frustration about that kind of work. Since then, he and our crew have cleaned duct systems in everything from older ranch homes in Conway to newer builds near Lake Nona, and the approach never changes: understand the equipment, explain what we find, quote one flat number before work starts, and leave the job site tidier than we found it. With Trane systems, that means checking things a generic duct cleaner skips, like blower airflow tolerances and whether flex duct has separated at the plenum. Part of the Relay Home Co. family, our Trane sales & service expertise comes from repetition, not a franchise manual.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Orlando
- Sagging flex duct starving Trane’s high-efficiency blowers. A Trane XV20i variable speed air conditioner moves serious air. In many Orlando homes built from the 1970s through the 2000s, flex duct runs through hot attics sag between supports, and that restriction forces the blower to work harder while certain rooms get weak airflow. We repair or replace the damaged sections.
- Mold at the plenum where humidity meets cold metal. With summer dew points above 70°F in Orlando, the outside of a Trane air handler in an unconditioned attic sweats. That condensation can wick into the duct connections at the plenum, and once mold takes hold there, the smell spreads through the entire system on every cycle. We clean the plenum area and verify the connections are sealed.
- False airflow errors from the Trane ComfortLink II control. When return ducts get partially blocked by construction debris or a collapsed flex run, the ComfortLink II thermostat can throw airflow errors that have nothing to do with a bad sensor. Before anyone quotes you a control board, we check the return side of the system first. That’s saved Orlando homeowners thousands.
- Pollen and oak fiber recirculation through aging XR13 coils. Orlando’s live oak canopy drops pollen for months each year. Older Trane XR13 condenser coils collect that material on the outdoor side, but if the return ductwork isn’t sealed properly, the same particles get pulled back inside and blown through the house. A cleaning without sealing the return runs is a half job.
- Crushed return lines in low-clearance attics. We’ve lost count of how many Orlando attics have a return flex run squeezed between a truss and the roof deck. A crushed 10-inch return line, in particular, restricts the entire system. Trane blowers compensate by running longer, which drives up energy use and pulls more unfiltered air in through any leak.
Trane Service in Orlando: What Local Conditions Mean for Your Equipment
In College Park, a lot of houses still have their original cast-iron or clay duct boots, the connectors where ducts meet the floor or wall. Cast iron rusts from the constant soil moisture in Central Florida, and clay cracks. When a Trane Hyperion air handler’s return blower pulls hard through a rusted boot, it’s also pulling musty crawlspace air and whatever else lives down there, even after a basic duct cleaning. A crew that only runs a brush through the ducts and calls it done will never check those boots. We do. That’s the difference between cleaning the visible run and fixing the actual source of the smell. The same principle applies in Winter Park, where many homes date back before central air conditioning was standard and boots have been retrofitted more than once.
In one 1990s home near Lake Eola, our crew found a Trane Hyperion air handler in a low attic with condensation forming on the return plenum every afternoon like clockwork. We pulled the flex ducts, cleared a crushed 10-inch return line, cleaned the evaporator coil, sealed the plenum with mastic, and re-insulated the boot. Cycle time dropped by 18 minutes, and the mold smell was gone within a week. None of that would have happened from a vent-by-vent cleaning alone.
Trane Models & Products We Service in Orlando
Our crews work on Trane XV20i and XR14 air conditioners, S9V2 gas furnaces, and Trane Hyperion air handlers across the Orlando service area. The philosophy is simple: when a Trane component tests within spec, we preserve it. We use OEM Trane filters, coils, and blower-specific cleaning tools during restoration work because the tolerances actually matter on this equipment. For duct repairs, we use quality aftermarket flex duct, mastic, and insulation to keep the total bill reasonable. Nobody needs an OEM-price markup on a length of R-8 flex. That balance of OEM where it matters and aftermarket where it doesn’t is how we keep Trane ownership affordable in Orlando without sacrificing performance.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Orlando
Most standard Trane air duct cleanings in Orlando run between $350 and $650 for a typical single-family home. That’s a whole-system price, not a per-vent figure that balloons once our technician is standing in your living room. What changes the number: the square footage of the home, how many returns and supplies exist, whether the evaporator coil needs cleaning, and whether we find crushed or separated flex duct that needs repair. A home in Conway with one return and eight supplies will land on the lower end. A two-story in Lake Nona with multiple returns, a Trane XV20i, and twenty-plus supplies will run higher. Every estimate is written, given to you before work begins, and backed by the 365-Day Done Right Promise. Call (850) 750-6095 for your number.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Orlando
Musty smells that survive a filter change usually come from mold growth at the plenum where your Trane air handler meets the ductwork, or from rusted cast-iron boots pulling crawlspace air into the return side. College Park’s older homes and high soil moisture make both problems common. A filter change addresses what’s coming through the return grille, not what’s growing downstream. Call (850) 750-6095 and we’ll check the plenum and boots directly.
Sometimes, but often not without repair. Trane’s high-efficiency blowers move more air than the systems installed in 1980s homes were designed for. If the existing flex duct has sagged, torn, or separated at the connections, that extra airflow will pull in dust from the attic and starve specific rooms. We assess the duct runs for leaks and restrictions as part of every cleaning.
Every 3 to 5 years for most Orlando homes, and closer to 3 if you have pets, live under heavy oak canopy, or run your Trane system nearly year-round. Orlando’s humidity keeps dust and pollen damp and sticky inside the ductwork, which means buildup happens faster here than in drier climates. If you’ve renovated recently or had a roof replacement, get the ducts checked sooner. Call (850) 750-6095 for a free estimate.
If the return side is restricted, yes. A Trane air handler that cycles frequently is often compensating for low airflow, not a faulty thermostat. Cleaning and repairing the return ducts restores designed airflow, which lets the blower run at its intended speed instead of short-cycling. We’ve seen this fix the problem outright in homes where the homeowner assumed they needed a new control board.
We do when the coil is accessible and shows buildup. A dirty evaporator coil on a Trane system reduces cooling efficiency and sends moisture and debris downstream into the ducts you just paid to clean. Leaving a fouled coil in place means recontamination within months. We’ll show you the coil before and after, because The Relay Standard includes photo documentation of all the work we perform.
Service Areas Near Orlando
Beyond Orlando proper, our crews run Trane air duct cleaning jobs throughout Orange County and into the surrounding area, including Trane service in Winter Garden, Trane service in Deltona, Apopka, Orlovista, St. Cloud, and the neighborhoods around Lake Nona and Conway.
Book Your Trane Service in Orlando Today
Clean ducts, clear price, no detours. The 365-Day Done Right Promise backs every Trane cleaning and Orlando Dryer Vent Cleaning we do, and a live person answers our phones around the clock. Call (850) 750-6095 for a free written estimate, or to ask Omar a question about your Trane system directly.
Written by Omar Haddad, Owner at Cardinal Air Duct Orlando, serving Orlando since 2005.